Skip to main content

Reglue your skins too!

Last year, me and my friend Lukas, we planned another skitour trip to High Tatras in Slovakia. However a couple of last skitters I complained about the quality of the glue on my skins. Usually when I saw Lukas or Michal going uphill without no problems and me fighting with my skis and the mountain. The time for regluing of my skins finally came.

I used very general and easy intructions I found on the web:
  1. Put the paper on the sticky part of the skins, heat it up with an iron.
  2. When you feel the glue is hot, semi-liquid (and stinks, as in my case) - remove the paper. The paper contains the dirt and also some glue.
  3. Repeat the step 2 till all the the glue is gone.
  4. Uniformly spread the new glue over the skins. I used the glue by Austrian company Kohla.
  5. Wait several hours till the glue dryes (this depends on the glue manufacturer).
Here are some photos of the whole process.

Prepare a lot of paper and some (preferably old) iron. This is an example of the dirt and glue that is caught up by the paper.


For comparison - right skin after a first ironing over papers. If I had enough and good glue on the skins, I would stop here - with paper and iron you are able to get rid of the dirt and not that much of the glue. Because my old glue was poor quality I decided to exchange it completely for the new one.


Adding the glue on the clean skins.




This video shows the same method I used:



Good luck with the regluing!

Labels:

Comments

  1. Lukáš Poláček10/15/2015 2:11 PM

    Toto ma čaká už o pár týždňov, budem sa inšpirovať

    ReplyDelete
  2. Martin10/15/2015 2:19 PM

    Toto je najlepší známy spôsob nanášania lepidla na pásy široko-daľeko v celej Galaxii.

    ReplyDelete

Post a Comment

Popular posts from this blog

Bialetti Moka Express

Nie že by som bol veľký milovník kávy, ale mám ju rád. Resp. stále sa ju učím piť spôsobom, aby som nebol na nej závislý a aby káva mi chutila ako nápoj. Našťastie viem, že je to možné. V byte máme stroj Braun na prekvapkávanú kávu cez papierový filter a po pár mesiacoch používania som zistil, že mi tá káva z neho vôbec nechutí. Vyriešil som to pridaním mlieka (laktosefrei) alebo umelým sladidlom. Doma na Slovensku máme jednoduchú malú espresso mašinku a pri troche neskromnosti poviem, že s ňou viem spraviť celkom dobrú kávu na nedeľné poobedie. Dobré espresso je ale dosť drahá záležitosť a preto som občas nejak pretrpel tú šálku kávy, ktorú som preplnil umelými sladidlami. Minulý týždeň som si povedal, že umelých sladidiel mám dosť. Nerobia dobrotu môjmu tráviacemu traktu. A hneď nato mi došlo, že budem musieť vyriešiť prípravu kávy tak, aby mi chutila bez prísad. Narazil som na dobrý blog Viktora Klima (aj a hlavne o káve ). A narazil som naňho tak, že som zadal do Google výraz - ko...
Post a Comment
Read more

... Shenandoah River

“Almost heaven, West Virginia Blue Ridge Mountains, Shenandoah River”   John Denver: Take Me Home, Country Roads Shenandoah National Park is relatively close to NYC. It was May and we already knew that we were moving to Boston at the beginning of June. We only had a couple of weeks to visit this park by car since the distance from Boston would be too ... distant. Sure, there was a lot to pack and do but the mountains simply couldn’t wait. We hit the road early in the morning on May 22nd. The visit of West Virginia was not optional. We made a stop at Harpers Ferry.  We had dinner at a restaurant along the river and of course we made a quick stop at the Appalachian Trail Visitor Center (unfortunately it was closed due to COVID). Harpers Ferry was a beautiful quintessential small town with historical landmarks. At the end of the day we built our tent in Low-Water Bridge Campground . The Shenandoah river was flowing right next to our tent but we were so tired that we did not end...
Post a Comment
Read more

iMac G3: Mac OS X 10.4.11

So my goal to install Mac OS X Tiger has come true. Firstly I needed Tiger on CD's and that was a big problem because you can buy Tiger mostly on DVD although there are also some CD versions but very expensive. But I was lucky because friend of my friend, Neuromanc, lent me this very rare 4-CD version. So thanks again :-). My iMac is not officially supported because it has no FireWire. But you can override this with software XPostFacto . I downloaded and installed the latest version so I could use it with Mac OS X 10.3 (the previous versions worked only with OS 9). I erased HDD entirely before the installation just to be sure. After first restart the installation continued from other CD's. The installation process took approximately one hour and ran without problem. After registration the update process started-up and took another hour or more. It was repeated several times ma inly due to Java updates. Then finally I could download software and this time the latest versions. I ...
Post a Comment
Read more